Galvanized Brick Wall Mesh With 10mm X 10mm Mesh Size

Galvanized Brick Wire Mesh coil mesh brick wall mesh with 10mm X 10mm mesh size

Brick Wall Mesh Introduction:

Brick wall Mesh is made of the hot dipped plate.And We could produce the width 10cm-30cm.Length :5m-200m .Now the very popular length is 15m.This goods is easy to cut.Make the brick building stronger.Brick Wall Mesh use primarily as an anti-cracking reinforcement in the construction of brick and block masonry. Coil mesh is available in a variety of widths to suit most wall constructions and is supplied coiled for ease of handling. Additional applications include strengthening cornices, low walls and balconies over door and window openings.

Brick Wall Mesh Specification:

Hole Type: Diamond

Hole Size: 12*25mm

width: 6.5cm,8cm,10cm, 15cm, 20cm,25cm,30cm

Length: 10m-100m

Brick Wall Mesh Installation:

The coil mesh is laid in strips between brick or block courses leaving approximately 25mm clearance from the faces of the work. Where coil mesh joins are required, ensure they overlap by at least 75mm.

The reinforcement is then simply embedded in the mortar for the next course.

In most instances, application every third course, for the full length of the wall, will be sufficient.

To reinforce brickwork at an opening, e.g. window or door, mesh should be installed to overlap part of the opening, and part of the solid wall.

Thinking of the width of the opening, lay the mesh approximately a quarter of the way across the opening. The mesh should lie the same distance again, across the solid wall.

Above windows or doors, install Catnic mesh for 2-3 courses, starting from the course above the lintel .

Brick Wall Mesh Application:

concrete slabbing, roads, paving, foundations, marine work, bank strong rooms, partition slabs, concrete block work, asphalt guttering etc.

Galvanized Brick Reinforcing Coil

Galvanized Brick Wall Mesh

10mm X 10mm Brick Wire Mesh

Galvanized Brick Wall Mesh With 10mm X 10mm Mesh Size Images